Service Manual – NC-6000 Date: OCT 1
st
, 2012 (Version 1.0)
Masterwork Automodules Tech. Corp., Ltd
Confidential
- 16 -
The machine counts and the solenoid toggles between
reject pocket and stacker. Check the two pockets to
make sure that banknote are separated equally in both
pockets.
*Note: If the Solenoid &Break doesn’t function well, please
contact MA.
4.2 Test Run – Strict Mode
To test the feeding process with 128 pairs IR array and the four sets of IR trigger
sensors in the bill path.
4.2.1 Run – Value List
To check the gap adjustment by using the retrieved values.
1. Choose a desired speed for testing.
2. Change the solenoid to “Down” position.
3. Start “Run – Value List
” by pressing the “ ” after
selecting on the item.
4. Place a bundle of 50 pcs test notes
(Denomination: 1USD) on the hopper and pull the
hopper guide to fix the size of test note. The
machine starts running once it detects notes on
the hopper.
Note: The distance of two sides from hopper to the edge of
banknote shall be around 3mm to 5 mm.
To Next Page
Loading...