Service Manual – NC-6000 Date: OCT 1
st
, 2012 (Version 1.0)
Masterwork Automodules Tech. Corp., Ltd
Confidential
- 81 -
2. Release the motor cover from the machine.
3. Loosen the three screws (M3x6-Round head w/ spring
washer) of the motor.
4. The two motors are new free to be removed from the
machine.
*Note: The cable of Motor A is P8 which is longer and the
cable of Motor B is P4 which is shorter.
5.3.5.13 Impeller
1. Turn the machine to the front side.
2. Release the cable of impeller from the three cable
clamps.
Cover of Motor B
Cover of Motor A
Motor A
Motor B
To Next Page
Loading...