MA NC-6000 - PCB NC6000-IRTR2 Board and IR Guide Box; Singler Module; PCB NC6000-DTR Board

Service Manual – NC-6000 Date: OCT 1
st
, 2012 (Version 1.0)
Masterwork Automodules Tech. Corp., Ltd
Confidential
- 77 -
5.3.5.6 PCB NC6000-IRTR2 board and IR Guide Box
1. Loosen the four screws (M3x10-Round Head with spring
washer) on the NC6000-IRTR2 board.
2. The NC6000-IRTE2 board is now free to be removed
from the bill path.
5.3.5.7 Singler Module
1. Release the bearing (688zz) from the shaft of singler
module.
2. The singler module is now free to be removed.
5.3.5.8 PCB NC6000-DTR Board
1. Loosen the two screws on the NC6000-DTR boards and
remove the board from the bill path.