MA NC-6000 - Page 50

Service Manual – NC-6000 Date: OCT 1
st
, 2012 (Version 1.0)
Masterwork Automodules Tech. Corp., Ltd
Confidential
- 50 -
2. Use a 3mm hex key to loosen the two hex flange
(M4×10)
3. Use a 1.5mm hex key to release the screw on the
retarding wheel spacer.
*Note: When assembling the singler spacer, please use two
pcs of milar film to maintein a certain distance between the
spacer and the top frame.
4. Release the E-ring from the left side of shaft by using a
screwdriver (-).