Manitowoc National Crane NBT30H-2 - Page 91

3
National Crane 03-20-2019 Control # 613-06 3-23
NBT30H-2 SERVICE MANUAL ELECTRIC SYSTEM
Connect the laptop to the Diagnostic Connector (1,
Figure 3-19) with the interface cable.
If the RCL is in the start up mode and at the Main Menu
screen (Figure 3-20), select function key 2, Tools icon.
At the Main Sensor Calibration Menu, select function key
(use arrow keys to scroll).
Enable Chart Download
At the Enable Chart Download,(Figure 3-21) Select the
checkmark to enable Chart Downloading Mode.
A 30 second timer in the lower left corner of the screen will
count-down remaining time to initiate the download of the
charts. When the timer runs out, chart downloading will be
disabled until the process is repeated.
Once enabled, the display will return to the sensor calibration
menu.
FIGURE 3-19
8703-7
1
8717-2
RCL Setup
Tools Diagnostics
FIGURE 3-20
FIGURE 3-21
8717-43