228
Examples of different configurations
Starter Sets consist of different devices, so you check what types of devices you have
and it will depend on which radio profiles you can use
Example 1 – Modem HW v5.1 and Super-Beacon-2
From this table we can see that in this configuration you can use all profiles, because
both devices support them.
Example 2 – Modem HW v.5.1 and Super-Beacon-3
From this table we can see that in this configuration you can use 38 kbps and 100kbps
radio profiles, because Super-Beacon-3 doesn’t support 400 kbps and 500 kbps (Won’t
be available, because of specific processor configuration).
Example 3 – Modem HW v.5.1-3 and Beacon Mini-RX-3
From this table we can see that in this configuration you can use 38 kbps and 100 kbps
radio profiles, because Modem HW v5.1-3 and Beacon Mini-RX-3 don’t support 400
kbps and 500 kbps (Won’t be available, because of specific processor configuration).
Example 4 – Modem HW v.5.1, Super-Beacon-2 and Beacon Mini-RX-3
From this table we can see that in this configuration you can use 38 kbps and 100 kbps
radio profiles, because Beacon Mini-RX-3 doesn’t support 400 kbps and 500 kbps
(Won’t be available, because of specific processor configuration).
To Next Page
Loading...