Marvelmind Super-MP-3D - Page 41

41
3.6.2.1. How to flash Beacon Mini-RX
When you receive Beacon Mini-RX, it is turned off. Open it, to get access to DIP
switch.
Put DIP switch to needed position:
- When DIP switch in this position – only charge of device is possible.
Put DIP switch to this position:
- To turn on the beacon
- For HEX programming (via Dashboard)
Put DIP switch to this position:
- For DFU programing (via: DfuSe v3.0.5 or DfuSe v3.0.6)