SedLine Sedation Monitor Chapter 6: EEG Download
www.masimo.com 48 Masimo
Download EEG Waveforms
To download the EEG waveforms onto the USB stick:
1. Ensure that there is a folder titled, “edf”, in the USB stick that is used to download
EEG waveforms from Root. Without this folder, the download cannot activate.
2. Remove all sensors from the patient’s application sites and silence any alarms.
3. Plug in the USB stick into one of two USB ports (located on the back of Root), and
the EEG information will automatically begin to download.
4. A confirmation message will briefly display at the top of the Root screen when the
information transfer is complete.
5. Unplug the USB stick from Root.
Note: The USB stick should have a minimum of 450MB of free storage space in order to
download the EEG waveforms from Root.
Note: Ensure that all information has been transferred before unplugging the USB stick as
this may cause corruption of the .edf files.
Import .edf Files
To import the data from the USB stick onto a computer
• Access the USB drive’s base directory from the computer
• Open the “edf” folder
• Select the desired session folder
• Open the .edf files with an EDF viewing program, such as EDF Viewer or Polyman.
To Next Page
Loading...
Need help?
General
