MASSO
MASSO Documentation
6.7. Loading & Running G-Code
MASSO runs gcode files directly from the USB Flash drive. Please see the below video for instructions on
how to load and run gcode files.
Files with extensions .nc, .cnc, .tap, .wiz, .txt, .eia are displayed in the F6 - Load File screen.
INFORMATION: Gcode files can also be transferred wirelessly using WiFi connection and
transferring files from PC using the MASSO Link software.
Scan the QR code to watch the MASSO video tutorial on YouTube
Or, Click here to view the video
INFORMATION: Gcode files as big as 4GB can be run on controller.
INFORMATION: If you are loading a very large Gcode and do not want to wait for the toolpath
preview to be displayed you can press the Escape button on screen or the ESC key on the
keyboard to cancel the preview.
v5.18 - 08 Apr,2021
www.masso.com.au Page 100 of 477
To Next Page
Loading...
