MASSO
MASSO Documentation
6.2. Loading Software to MASSO-G2
Regular updates are released to add more features to the units. Custom software's are also released for
special client requirements. The software up-gradation process can be easily performed on site by following
the instructions below:
Scan the QR code to watch the MASSO video tutorial on YouTube
Or, Click here to view the video
Information: Avoid using unbranded USB Flash drives as these are known to give issues with
software install and upgrades
Information: It is advisable to make a backup of your settings before upgrading your software.
NOTE: For the below example the controller serial number will be 5A-660
WARNING: Check that while copying file from email the file name is not renamed and is exactly
the file name sent to you. example "00000660.HTG"
Summary of the install process
Check that the file name matches the serial number of the controller.
Connect a USB FLASH drive to your PC/MAC and make sure it's been formatted in FAT or FAT32
format.
Copy all the files received in the software update email including "00000660.HTG" and Data1.HTG
v5.18 - 08 Apr,2021
www.masso.com.au Page 56 of 477
To Next Page
Loading...
