McHale HS2000 Round Bale Wrapper
17
work on the machine. If it is not possible to lower the machine or attachment
to the ground, always securely support the machine or attachment. Do not
work under a machine that is solely supported by a jack. Never support the
machine with props that may break or crumble under continuous load.
Never disable any electrical safety circuits, tamper with safety devices, or
carry out any unauthorised modification to the machine.
Avoid heating near pressurised fluid lines as pressurised lines can be
accidentally damaged when heat goes beyond the immediate flame area.
During inspection
If carrying out an inspection during machine operation within the ‘Danger
Zone’ (highly dangerous and NOT recommended!), there should be a fully
trained and competent second person operating both the tractor and wrapper
controls. If at any time the second operator loses sight of the inspector, turn
off all tractor power immediately! Such inspection should only be carried out if
all guards are fully in place, the machine is on level ground, and a safe
distance is kept from any hazards on the machine.
WARNING: Dispenser arm rotation must never exceed 30 rpm
Never increase the speed of dispenser arm rotation.
To Next Page
Loading...
