McHale HS2000 Round Bale Wrapper
87
15
Certification & Warranty
15.1 Declaration of Conformity
The Declaration of Conformity is provided by McHale. It certifies the new machine
under all the relevant provisions of the EC Machinery Directive and the National Laws
and Regulations adopting this directive.
The declaration gives a description of the machine and its function, along with the
model and serial number details. See the Declaration of Conformity on the next page.
By any alteration of the machine, the Declaration of Conformity, as well as the CE sign
on the machine, loses its validity.
15.2 PDI form
The PDI (pre-delivery inspection) form is filled out on the commissioning of every new
machine, by the McHale dealer. The following checks are completed and signed off:
All parts and accessories are provided with the machine to the customer.
Machine is reassembled correctly.
Tyre pressure is correct.
Hydraulics, electrics, and lighting are working.
New owner has been instructed on how to operate and maintain the machine.
The PDI is included in the operator manual, please see page 89.
15.3 Change of ownership pre-checks
The PDI (pre-delivery inspection) form that is filled out on the commissioning of every
new machine, should also be used during the transfer of ownership of a McHale
machine. The same check list must be completed and any areas requiring attention
addressed before the re-sale of the machine should occur. Pay particular attention to
all safety related areas. Take time to familiarise the new owner with machine operation,
maintenance and all its safety features.
15.4 Limited Warranty
Limited Warranty conditions are supplied with each McHale product. They cover the
terms and conditions associated with abnormal failure under normal working
conditions. Please see page 90 for more detail.
To Next Page
Loading...
