EasyManua.ls Logo

McHale HS2000 - 12 Machine Maintenance; 12.1 Maintenance intervals

McHale HS2000
91 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
McHale HS2000 Round Bale Wrapper
70
12
Machine Maintenance
To maintain the McHale HS2000 in good working order it is necessary to carry out
preventative maintenance regularly. The following section gives details of how this may
be carried out and how often it will be required.
WARNING: Wear proper safety gear and follow all instructions
Ensure to wear proper safety gear at all times when working with the
machine, such as gloves, eye protection, etc. and follow all safety decals
and instructions.
WARNING: Inspections in the “Danger Zone” during machine
operation require a second trained operator at the controls
McHale recommend that nobody is ever in the “Danger Zone” at any
time during machine operation, but in the event of carrying out
inspections when the machine is in operation (contrary to our safety
recommendations!), there must always be a second operator at the
tractor controls (who is fully competent in the operation of both the tractor
and machine), in case an emergency stop action is required.
ENVIRONMENT: Health and safety rules re. environmental damage
It is vitally important to observe health and safety rules in order to avoid
unnecessary environmental damage or danger to anybody near the
machine. This especially applies to the responsible disposal of oil. Never
spill pollutants (oil, grease, filters, etc.) on the ground, never pour them
down the drain and never discard them where they can pollute the
environment. Always take waste materials to a recycling centre.

Table of Contents

Related product manuals