McHale HS2000 Round Bale Wrapper
73
Every year
1. Clean and lubricate dispenser gears
2. Change oil and grease on the brake unit
3. Change dispenser drive gearbox oil level
Every 2 years
Change hydraulic oil
It may become necessary from time to time to clean the dispenser rollers as they pick
up the “tack” from plastic film. Clean off with kerosene.
At the end of the wrapping season the machine should be washed and cleaned. Any
damaged paintwork should be touched up. Any maintenance or repairs should be
carried out at this stage. The electronic control box is not waterproof, so it must be
always be stored in a dry environment (see “Storage” on page 77). All exposed
hydraulic cylinder rods should be greased.
CAUTION: Hydraulic hoses to be replaced every 5 years
All hydraulic hoses must be replaced every 5 years.
To Next Page
Loading...
