EasyManua.ls Logo

Medicomp TelePatch PM750 - Page 23

Default Icon
79 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Have a question or need assistance?
Call Medicomp’s Patient Support: 877-996-5553
For optimal performance from the Handset, it is recommended to plug the charger cord into
the Handset overnight until the Handset is fully charged. Instructions on charging the Handset
are on page 22 of this User Manual.
Universal Pendant
Batteries will need to charge every seven (7) days on average. There are two
(2) lithium ion batteries in the Tele
Patch Kit, so the procedure will not be interrupted.
Instructions about how to charge the Pendant Battery can be found in the charging the
Batteries section of this User Manual.
How to attach USB Cable to AC Power Supply block:
Should the Charger Cord come apart or if the Charger Cord is in two pieces (the MicroUSB cable
and the Power Supply) when the Tele
Patch Kit is received, insert the USB connector into the
port on the power supply. Keep the two pieces connected for the duration of the procedure.
Handset AND BATTERY CHARGER ARE POWERED BY THE CHARGER CORD ONCE
CHARGER CORD IS PLUGGED IN TO Handset OR BATTERY CHARGER AND THEN A WALL
OUTLET.
CHARGER CORD MUST NOT BE OBSTRUCTED BY FURNITURE OR LARGE OBJECTS AND
REMAIN ACCESSIBLE TO DISCONNECT FROM WALL OUTLET EASILY, AS NEEDED.
Tele
Patch Cardiac Monitor PM750
USER MANUAL - UTM0000701-05E
| APRIL 4, 2019
23

Table of Contents

Related product manuals