Have a question or need assistance?
Call Medicomp’s Patient Support: 877-996-5553
The Tele
Patch Battery Charger will replenish battery power when lithium ion battery power is
depleted. The same Charger Cord used to charge the Handset is used to power the Battery
Charger.
For optimal performance from the Battery Charger, it is recommended to plug the Charger Cord
into the Battery Charger and a wall outlet until the battery is fully charged. The indicator light
on the flat end of the charger, next to the Charger Cord outlet, is flashing orange while
charging, and steady green when fully charged. The Battery Charger will stop charging the
battery once fully charged.
Connecting Charger Cord To Battery Charger:
● Place the Battery Charger on a flat, dry surface, near a wall outlet
● Plug Charger Cord into the corresponding outlet on the Battery Charger
● Plug the Charger Cord into the wall outlet
Charger Cord properly inserted into
Battery Charger
Correct direction of
Incorrect direction of
Charging a Battery in the Battery Charger:
THIS PRODUCT UTILIZES A RECHARGEABLE LITHIUM-ION BATTERY PACK. TO ENSURE
SAFE CHARGING AND MAXIMUM PERFORMANCE OVER THE LIFE OF THE PRODUCT ALWAYS
USE THE MEDICOMP PROVIDED CHARGER. DO NOT ATTEMPT TO CHARGE THE BATTERY ON
ANOTHER MANUFACTURER’S CHARGER.
Tele
Patch™ Cardiac Monitor PM750
USER MANUAL - UTM0000701-05E
| APRIL 4, 2019
27
To Next Page
Loading...
