Have a question or need assistance?
Call Medicomp’s Patient Support: 877-996-5553
Medicomp TelePatch Handset
Procedure Set Up Screen
Choose “Accept Settings” or change settings from this screen.
To accept default settings:
● Tap “Accept Settings”.
OR to change settings:
● Tap the setting to be changed.
Pacemaker Settings
The following describes the steps and screens when 'Pacemaker' is selected as a setting. To
select a setting for pacemakers:
● Tap “No”.
● Tap option desired.
● If the patient desires to change more settings, then repeat the steps above for Protocol
and Setup.
● After all the correct settings have been chosen.
● Tap “Accept Settings”.
● If the 'Pacemaker' setting is selected, and if a paced beat was detected as typical, the
Handset displays a screen of the ECG during the procedure setup. Then it will display the
settings. Please select “Yes” to accept this step.
● After all the correct settings have been chosen.
● Tap “Accept Settings”
Tele
Patch™ Cardiac Monitor PM750
USER MANUAL - UTM0000701-05E
| APRIL 4, 2019
40
To Next Page
Loading...
