EasyManua.ls Logo

Medicomp TelePatch PM750 - Procedure Set-Up: Fingertip Electrodes; Pendant and Handset Setup (Fingertip); Recording Symptoms (Fingertip)

Default Icon
79 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Have a question or need assistance?
Call Medicomp’s Patient Support: 877-996-5553
The Pendant should always be in the Cable Cradle, the Cable should remain plugged into
the Cable Cradle.
Enjoy all of your regular activities like exercise or gardening, while wearing the Pendant,
and Cable Cradle with Cable.
DO NOT shower with the Cable Cradle and Cable:
Turn off the Pendant by pressing the Power Button.
Unsnap the cable heads from the electrodes.
Leave Cable Cradle, Cable, Pendant (and lanyard) outside the
shower.
Electrodes may be worn in the shower - fresh electrodes may
need to be applied following the shower.
After showering and dry, put on the lanyard with Cable Cradle and Pendant, re-attach
electrodes, turn on Pendant.
PROCEDURE SET-UP: Fingertip Electrodes
If using Fingertip Electrodes for procedure, start preparation here.
Step 1 - Start Pendant:
Follow directions for starting Pendant on page 32.
Step 2 - Starting the Handset:
Follow directions for starting Handset on page 35.
Step 3 - Procedure Set Up:
Follow directions for initiating procedure on page 35.
Step 4 - Procedure Settings:
Follow directions for initial procedure set up on page 36.
Step 5 - Initial Procedure Screens:
Follow directions for completing procedure set up on page 39.
Recording Symptoms: Fingertip Electrode Procedure
When experiencing a symptom, or at other times as directed by physician:
Remove the Pendant from pocket or cable cradle.
Press the SYMPTOM button on the Pendant or on the Handset.
Tele
Patch Cardiac Monitor PM750
USER MANUAL - UTM0000701-05E
| APRIL 4, 2019
53

Table of Contents

Related product manuals