Have a question or need assistance?
Call Medicomp’s Patient Support: 877-996-5553
● Single Channel Electrode Patch supports modified lead II with reference right leg drive.
● Dual Channel Electrode Patch supports Channel A modified lead II, Channel B modified
III and a reference electrode.
THE TELEPATCH ELECTRODE PATCH IS A SINGLE USE ITEM. ONCE THE ELECTRODE PATCH
IS REMOVED FROM THE SKIN IT SHOULD BE DISCARDED AS HOUSEHOLD WASTE.
PLEASE DO NOT DISCARD THE Universal Pendant. MAKE SURE TO REMOVE THE
Universal Pendant FROM THE CRADLE BEFORE DISCARDING THE ELECTRODE PATCH. THE
PENDANT IS TO BE INSERTED IN THE CRADLE OF A FRESH ELECTRODE PATCH TO CONTINUE
PROCEDURE.
Description of Patch and Patch Packaging
Electrode Patch
Description Medical sensor electrode, Foam, 1.5”
teardrop shape, wet gel
Gel Wet Gel 7% KCL
Gel Sponge Polyurethane (reticulated foam)
Substrate Polyester printed with black ink
Foam Polyethylene foam with acrylic adhesive
Conductive Ink Ag/AgCl
Insulator Blue UV Dielectric
Release Liner Polystyrene (HIPS) with silicone release
Connector 5 Pin Housing
Packaging
Tele
Patch™ Cardiac Monitor PM750
USER MANUAL - UTM0000701-05E | APRIL 4, 2019
31
To Next Page
Loading...
