4 Description of the device
16
Holder for insert baskets
The holder is placed on the work surface.
For cooling the instruments after sterilization, the universal basket or
the holder with round mounts/ISO adapters can be placed on this
holder.
Package holder for wrapped instruments
The package holder is used to hold up to 3 separately wrapped
instruments (packaging according to }EN 868-5).
The package holder can be removed from the chamber of the steam
sterilizer with the basket handle by hooking it into the upper holes.
Holder for universal basket
The holder is hooked into the sideways venting slots of the steam
sterilizer and is used to hold the universal basket while cooling down
the instruments.
Holder with 7 round mounts
Holder with round mounts for conventional support of up to 7
unwrapped handpieces or turbines.
Holder with 7 ISO adapters
Holder with ISO adapters for symmetrical support of up to 7
handpieces or turbines.
To Next Page
Loading...
