1 General guidelines
5
1 General guidelines
Please read this user manual carefully before commissioning the device. The manual includes important safety instruc-
tions. Make sure that you always have access to digital or printed version of the user manual.
Should the manual no longer be legible, is damaged or has been lost, you can download a new copy from MELAG down-
load centre at www.melag.com.
Symbols used
Symbol Explanation
Indicates a dangerous situation, which if not avoided, could entail slight to life-threatening
injuries.
Draws your attention to a situation, which if not avoided, could result in damage to the
instruments, the practice fittings or the device.
Draws your attention to important information.
Formatting rules
Example Explanation
Universal-
Program
Words or phrases appearing on the display of the device are marked as display text.
Prerequisites for the following handling instruction.
Refer to the glossary or another text section.
Information for safe handling.
Disposal
MELAG devices are synonymous with high quality and a long life-span. When you eventually need to decommission your
MELAG device, the required disposal of the device can take place with MELAG in Berlin. Simply contact your stockist.
Dispose of accessories and consumption media which you no longer require in the appropriate manner. Comply with all
relevant disposal specification in terms of possibly contaminated waste.
The packaging protects the device against transport damage. The packaging materials have been selected for their envi-
ronmentally-friendly disposability and can be recycled. Returning the packaging to the material flow reduces the amount
of waste and saves raw materials.
Dispose of spare parts that are no longer used, e.g. seals, properly.
MELAG draws the operator’s attention to the fact that they are responsible for deleting personal data on the device to be
disposed of.
MELAG draws the operator’s attention to the fact that they may be legally obliged (e.g. in Germany according to
ElektroG) to remove used batteries and accumulators non-destructively before handing over the device, provided they
are not enclosed in the device.
To Next Page
Loading...
