8 Logging
39
8 Logging
Batch documentation
The batch documentation serves as proof of the successful conclusion of the program and represents an obligatory part
of quality assurance. The device internal log memory saves such data as the program type, }batch and process parame-
ters of all the programs completed.
To obtain the batch documentation, you can output the internal log memory and transfer its data to various output media.
This can be performed immediately at the end of every program or at a later point, such as at the end of the day.
Capacity of the internal log memory
The capacity of the internal log memory is sufficient for 40 logs. If the internal log memory is full, the oldest log will be
overwritten automatically at the beginning of the next program.
If a printer is connected and the option Immediate output has been set to NO, a security query will be issued before
the saved log is overwritten. For further information about connecting the printer, consult the user manual of the respec-
tive device.
Displaying the daily batch counter
The last batch number of the day is shown on the display after every program run.
You can arrange for the batch number to be displayed.
1. Select the menu Function by pressing the '+' and '-' keys
simultaneously.
Ê The display will show the message Function: Last
batch number.
2. Press the 'P' key to display the current batch number of the day.
3. To return to the initial state, press the 'S' key twice.
Programm
Start-Stop
-
+
Last batch number
6
Displaying the total batch counter
You can display the counter reading of all the batches that have been run so far.
1. Select the menu Function by pressing the '+' and '-' keys
simultaneously.
Ê The display will show the message Function: Last
batch number.
2. Navigate with the '+' or '-' key until the corresponding display
appears.
3. Press the 'P' key to display the current total batch counter.
4. To return to the initial state, press the 'S' key twice.
Programm
Start-Stop
-
+
367
Total batches
To Next Page
Loading...
