Mercury 45 Service Manual

CYLINDER BLOCK/CRANKCASE
Page 4B-3990-828631R3 MARCH 1999
4. Install ignition coils and reattach engine wiring harness.
30028
c
b
a
d
a-Top Ignition Coil
b-Bottom Ignition Coil
c-Fasten (and Ground) Coil Ground Leads with Bolt
d-Sta-Strap
Ignition Coil Mounting Bolt Torque
62 lb-in. (7 Nm)
5. Reinstall trigger base with four bolts.
30027
a
b
a-Trigger Base
b-Mounting Bolts (4)
Trigger Base Bolt Torque
75 lb-in. (8.5 Nm)

Mercury 45 Specifications

General

Horsepower	45 HP
Cylinders	3
Starting	Electric
Full Throttle RPM Range	5000-6000 RPM
Steering	Remote
Exhaust	Through Prop
Shaft Length	20 in