DRIVE SHAFT HOUSING SERVICE MANUAL NUMBER 28
Page 3A-46 90-863160 MAY 2000
5. Place top gear and then thrust collar over shaft.
a
b
c
76847
a-Thrust Collar
b-Top Gear
c-Stand (91-17301A1)
6. Press gear and thrust collar down so that groove in shaft is completely exposed. Install
keepers.
22105
a
b
a-Top Gear
b-Keepers (2)
7. Release pressure from gear. Thrust collar should come up to the point where top of
keepers are level with top of thrust collar at position shown.
22105
a
a-Keepers Level With Thrust Collar
To Next Page
Loading...
