BRAVO THREE GEAR HOUSING SERVICE MANUAL NUMBER 28
Page 3D-4 90-863160 MAY 2000
Torquing Outer Prop Shaft Bearing Retainer and Bearing Carrier
Use the following procedure to allow torquing outer prop shaft bearing retainer and bearing
carrier with a torque wrench.
1. On beam-type torque wrenches, measure from square drive to fulcrum (pivot) point of
handle.
2. On click-stop or dial type torque wrenches, measure from square drive to reference
mark on handle (two bands, etc.).
Lubricants/Sealants/Adhesives
Description Part Number
Quicksilver 2-4-C Marine Lubricant with
Teflon
92-825407A2
Quicksilver Special Lubricant 101 92-13872A1
3-M Adhesive 92-86166Q1
Loctite 271 92-809820
Quicksilver High Performance Gear Lube 92-19007A24
Needle Bearing Assembly Lubricant 92-825265A1
Perfect Seal 92-34227-1
Loctite 242 Obtain Locally
To Next Page
Loading...
