Mercury 90-863160

SERVICE PROCEDURES REQUIRING MAJOR DISASSEMBLY SERVICE MANUAL NUMBER 28
Page 4B-46 90-863160 MAY 2000
High Performance Transom Assembly
1. Thread hinge pin onto special tool. Lubricate hinge pins with Quicksilver Special
Lubricant 101.
71828
a
b
a-Hinge Pin
b-Special Tool (91-63616)
2. Slide hinge pin through gimbal ring and bell housing. Be sure to align screw holes in
hinge pin with holes in gimbal ring.
71827
a
a
a-Screw Holes
3. Lightly tap hinge pin into place using slide hammer.
71826
a
a-Slide Hammer