Mercury 90-863160

BRAVO THREE GEAR HOUSING SERVICE MANUAL NUMBER 28
Page 3D-26 90-863160 MAY 2000
Bearing Carrier Seal And Bearing
Inspection
1. Check bearing carrier for signs of corrosion, especially on gear housing to bearing carri-
er mating surfaces. If corrosion is evident, replace bearing carrier.
2. Inspect needle bearing for pitting, grooves, discoloration or embedded particles. If any
of these conditions exist, replacement is necessary.
Removal
1. Press seal and bearing from carrier using seal removal tool.
b
a
a
77104
77105
a-Seal Removal Tool (91-862064A1)
b-Bearing Carrier
Installation
1. Apply gear lube to outer diameter of bearing and install roller bearing using bearing in-
stallation tool.
75896
a
b
a-Bearing Installation Tool (P/N 91-805356)
b-Bearing Carrier