SERVICE PROCEDURES REQUIRING MINOR DISASSEMBLY SERVICE MANUAL NUMBER 28
Page 4A-10 90-863160 MAY 2000
Special Information
Trim Limit Switch
The trim limit switch has a sealing system for improved water resistance and durability. The
trim limit switch leads are connected internally to help ensure good electrical integrity.
71415
Trim Limit Switch - Port
Trim Position Sender
The trim position sender has a sealing system for improved water resistance and durability.
The trim limit leads are connected internally to help ensure good electrical integrity.
71414
Trim Position Sender - Starboard
Removal
WARNING
Disconnect both battery cables before installing new trim limit switch or trim
sender.
1. Remove sterndrive unit. Refer to section 2A.
2. Remove trim limit switch.
71221
a
a-Attaching Hardware
To Next Page
Loading...
