Mercury 90-863160

BRAVO ONE GEAR HOUSING
SERVICE MANUAL NUMBER 28
90-863160 MAY 2000 Page 3B-47
Installing Propeller Hub Assembly
NOTE: Propeller Hub Assembly P/N 840389A1 will fit both long A45, A55 and short A46,
A56 bore hub propellers.
1. Apply a small amount of Special Lubricant 101 or 2-4-C Marine Lubricant with Teflon to
propeller hub assembly.
2. Use an arbor press (preferred) or suitable tool such as a rubber or plastic hammer to
install propeller hub assembly.
3. Install propeller hub assembly into propeller until propeller hub shoulder is touching top
edge of propeller bore.
a
d
b
c
77111
a-Arbor Press
b-Propeller Hub Assembly
c-Propeller Hub Shoulder
d-Propeller