Mercury 90-863160

DRIVE SHAFT HOUSING SERVICE MANUAL NUMBER 28
Page 3A-62 90-863160 MAY 2000
10. Install shift handle tool through shift linkage and into shifter shaft. Move shifter shaft back
and forth as necessary to align lower hole in shift cam assembly with threaded hole in
shifter shaft. Apply Loctite 271 to first 2 or 3 threads of screw, install shift cam cap screw
and torque to 100-120 lb-in. (12-13 Nm).
c
a
b
76864
a-Shift Handle Tool
b-Shift Linkage
c-Shift Cam Assembly
11. Apply Loctite 271 to first 2-3 threads of shift linkage cap screw and install. Torque screw
to 100-120 lb-in. (12-13 Nm).
76854
a
a-Cap Screw