Mercury 90-863160

DRIVE SHAFT HOUSING
SERVICE MANUAL NUMBER 28
90-863160 MAY 2000 Page 3A-65
14. Install top cover. Torque screws to 20 lb-ft (27 Nm).
50304
b
a
76835
a-Top Cover
b-Screws
15. Install rear cover and screws. Torque screws to 20 lb-ft (27 Nm).
NOTE: To avoid damage to cover, evenly tighten screws until cover is flush against drive
shaft housing before torquing screws.
76805
b
a
a-Rear Cover
b-Screws (3)