BRAVO TWO GEAR HOUSING SERVICE MANUAL NUMBER 28
Page 3C-30 90-863160 MAY 2000
4. Install driven gear assembly.
22083
a
a-Driven Gear Assembly
5. Install original thickness shim(s) and drive shaft lower bearing cup using cup driver and
old drive shaft. Use original shims or if lost or misplaced, start with .050 in. (1.27 mm).
75903
a
b
c
d
.
a-Shims
b-Lower Bearing Cup
c-Cup Driver
d-Old Drive Shaft
To Next Page
Loading...
