Mercury 90-863160

BRAVO THREE GEAR HOUSING
SERVICE MANUAL NUMBER 28
90-863160 MAY 2000 Page 3D-31
7. Install original thickness shim(s) for lower bearing cup into gear housing. If shims were
lost or ruined where original thickness cannot be determined, install a .050 in. (1.27 mm)
shim pack for a starting point.
72262
a
a-Shim(s)
8. Install drive shaft lower bearing cup, using cup driver.
72263
c
b
a
a-Bearing Cup
b-Bearing Cup Driver (P/N 91-67443T)
c-Old Propeller Shaft Or Driver Rod