Mercury 90-863160

SERVICE PROCEDURES REQUIRING MAJOR DISASSEMBLY SERVICE MANUAL NUMBER 28
Page 4B-44 90-863160 MAY 2000
13. Install trim cylinders on gimbal ring.
71489
a
b
c
d
e
e
f
g
h
a-Anchor Pin (1)
b-Slots (2)
c-Flat Washer (Large Inner Diameter) (2)
d-Snap Rings (2)
e-Bushings (4)
f-Flat Washer (Small l.D.) (2)
g-Locknut (2)
h-Plastic Cap (2)
14. Coat threads of plastic plugs (if used) with Perfect Seal and thread into access hole until
flush with housing. Use a 5/8 in. hex wrench or 5/8 in. hex stock to secure.
22756
a
75904
a-Plastic Plugs
15. Touch up any bare metal spots with primer and “Phantom Black” spray paint.