Mercury 90-863160

SERVICE PROCEDURES REQUIRING MAJOR DISASSEMBLY
SERVICE MANUAL NUMBER 28
90-863160 MAY 2000 Page 4B-53
5. Install core wire locating tool on face of bell housing.
50327
a
b
a-Bell Housing
b-Core Wire Locating Tool (P/N 91-17263)
6. Install threaded tube until it contacts. Tighten finger tight.
7. Tighten jam nut securely.
22183
a b
a-Threaded Tube
b-Jam Nut
8. Install cable end guide over core wire and insert core wire through cable anchor. Tighten
anchor screws evenly and torque to 20 lb-in. (2.3 Nm).
22183
a
b
d
d
c
a-Cable End Guide
b-Core Wire
c-Anchor Screws
d-Sight Port