Mercury 90-863160

DUAL POWER TRIM SYSTEM SERVICE MANUAL NUMBER 28
Page 5C-6 90-863160 MAY 2000
INSTALLATION
1. Install new relay.
IMPORTANT: Use 63/67 (Tin/Lead) alloy solder. DO NOT use acid core solder as
damage to relay can result. Coat terminal connections with Quicksilver Liquid
Neoprene.
2. Resolder wires from terminal block to relay as shown.
3. Coat terminal connections with Quicksilver Liquid Neoprene.
22216
a
c
b
a-Relay No. 1
b-Relay No. 2
c-Terminal Block
4. Install control box cover.
22086
b
a
a-Screws
b-Cover