Metal Work EB 80 User Manual

I
GB
MANUALE D'USO EtherNet/IP
USER MANUAL EtherNet/IP

Metal Work EB 80 Specifications

General

Brand	Metal Work
Model	EB 80
Category	Control Unit
Language	English

Summary

1. INSTALLATION

1.1 GENERAL INSTRUCTIONS FOR INSTALLATION

General guidelines before installation work.

1.2 ELECTRICAL CONNECTION AND DISPLAY ELEMENTS

Details on electrical connections and display elements.

1.3 ELECTRICAL CONNECTIONS: PIN ASSIGNMENT OF CONNECTOR

Pin assignments for connectors.

1.3.2 M12 Connector for EtherNet/IP Network

1.4 POWER SUPPLY

Information on the power supply for the system.

1.4.1 Supply voltage

Details on the system's supply voltage range.

1.4.2 Input current

Information on the input current requirements.

1.4.2 Input Current

1.5 MAINS CONNECTION

Details on connecting to the mains.

1.5.1 Use of Switches

How to use the integrated switch.

2. COMMISSIONING

2.1 CONNECTIONS TO THE EB 80 EtherNet/IP SYSTEM

Connecting the EB 80 system to the network.

2.2 INSTALLATION OF THE EB 80 SYSTEM IN A EtherNet/IP NETWORK

Installing the system in an EtherNet/IP network.

2.3 EB 80 SYSTEM CONFIGURATION

Configuring the EB 80 system.

2.4 ADDRESSING

How the system is addressed.

2.3 EB 80 System Configuration

2.4 ADDRESSING

How the system is addressed.

2.5 Configuring the EB 80 System in EtherNet/IP Network

2.5.1 Assigning data bits to solenoid valve base outputs

Mapping data bits to outputs.

2.5.2 Examples of solenoid pilot output addresses

Examples of output addresses.

2.5.3 Configuring the parameters of the unit – Params 11 Fail Safe

Setting Fail Safe parameters for outputs.

2.5.3.1 Start-up Parameters

2.5.3.2 Analogue Output Display

Setting analogue output display endianess.

2.5.3.3 Analogue Input Data Format

Setting analogue input data format.

2.5.3.4 Enable of 14.0 Diagnostic

Enabling Industry 4.0 diagnostic functions.

3. ACCESSORIES

3.1 INTERMEDIATE MODULE - M, WITH ADDITIONAL POWER SUPPLY

Details on the intermediate module.

3.2 ADDITIONAL ELECTRICAL CONNECTION - EOAD

Information on the EOAD connection.

3.3 SIGNAL MODULES - S

Various signal modules for inputs and outputs.

3.2.2 Addressing the Additional Electrical Connection - EOAD

3.3 SIGNAL MODULES - S

Various signal modules for inputs and outputs.

3.3.1 Digital Input Modul

Details on the digital input module.

3.3.1.4 Operating State

3.3.1.5 Signal Persistence

Setting signal persistence for digital inputs.

3.3.1.6 Input Filter

Applying input filters for digital inputs.

3.3.2 Digital Output Module

3.3.2.1 Type of Output and Power Supply

Type of output and its power supply.

3.3.2.2 Electrical Connections

Electrical connections for digital outputs.

3.3.2.3 Polarity

Configuring the polarity of digital outputs.

3.3.2.5 Fail Safe Outputs

3.3.2.6 Faults and Alerts

Handling faults and alerts for digital outputs.

3.3.3 Digital 6-Output M8 Module + Electrical Power Supply

3.3.3.1 Auxiliary Power Supply

Information on auxiliary power supply.

3.3.4 Analogue 4-Input M8 Module

3.3.4.1 Electrical Connections: Pin Assignment of M8 Connector

Electrical connections and pin assignments for M8 connector.

3.3.4.2 Signal Range

Configuring the signal range for analogue inputs.

3.3.4.3 Filtering the Value Measured

Filtering measured values for stability.

3.3.4.4 User Full Scale

3.3.4.5 Connection of Sensors

How to connect different sensor types.

3.3.5 Analogue 4-Output M8 Module

3.3.5.1 Electrical Connections: Pin Assignment of M8 Connector

Electrical connections and pin assignments for M8 connector.

3.3.5.2 Signal Range

Configuring the signal range for analogue outputs.

3.3.5.3 User Full Scale

Setting user-defined full scale for analogue outputs.

3.3.5.7 Fail Safe Output

3.3.5.8 Fault Mode Value

Determining fault mode value for analogue outputs.

3.3.6 M8 Analogue 4-Input Module for Temperature Measurement

3.3.6.1 Electrical Connections of Temperature Sensors (Pt and Ni Series)

Electrical connections for Pt and Ni series temperature sensors.

3.3.6.2 Electrical Thermocouple Connections

Electrical connections for thermocouple sensors.

3.3.6.3 Unit Parameters

3.3.6.4 Minimum Value

3.3.6.5 Maximum Value

Setting maximum reference value for temperature monitoring.

3.3.6.6 Parameters Configuration

Configuring various parameters for temperature inputs.

3.3.6.7 14.0 Functions

4. DIAGNOSTICS

4.1 EtherNet/IP NODE DIAGNOSTIC MODE

Diagnostic mode for the EtherNet/IP node.

4.2 EB 80 SYSTEM DIAGNOSTIC MODE - ELECTRICAL CONNECTION

Diagnostic mode for electrical connections.

4.2 EB 80 System Diagnostic Mode - Electrical Connection

4.3 EB 80 System Diagnostic Mode - Valve Base

4.4 EB 80 SYSTEM DIAGNOSTIC MODE - SIGNAL MODULES - S

Diagnostic mode for signal modules.

4.4.1 Diagnostic Mode of Signal Modules - S - Digital Inputs

Diagnostic mode for digital input modules.

4.4.2 Diagnostic Mode of Signal Modules - S – Digital Outputs

Diagnostic mode for digital output modules.

4.4.3 Diagnostic Mode of Signal Modules - S - Analogue Inputs

4.4.4 Diagnostic Mode of Signal Modules - S - Analogue Outputs

Diagnostic mode for analogue output modules.

4.4.5 Diagnostic Mode of Signal Modules - S - Analogue Inputs for Temperature Measurement

4.5 EB 80 SYSTEM DIAGNOSTIC MODE - ADDITIONAL ELECTRICAL CONNECTION

Diagnostic mode for additional electrical connections.

5. CONFIGURATION LIMITS

Constraints for system configuration.

6. TECHNICAL DATA

6.1 EtherNet/IP ELECTRICAL CONNECTION

Technical data for EtherNet/IP connection.

6.2 SIGNAL MODULES - S - DIGITAL INPUTS

Technical data for digital input signal modules.

6.3 SIGNAL MODULES - S - DIGITAL OUTPUTS

Technical data for digital output signal modules.

6.4 SIGNAL MODULES - S - DIGITAL OUTPUTS + ELECTRICAL POWER SUPPLY

6.5 SIGNAL MODULES - S - ANALOGUE INPUTS

Technical data for analogue input signal modules.

6.6 SIGNAL MODULES - S - ANALOGUE OUTPUTS

Technical data for analogue output signal modules.

6.7 SIGNAL MODULES - S - ANALOGUE INPUTS FOR TEMPERATURE MEASUREMENT