METER AQUALAB 3 - Page 29

25
OPERATION
Figure32 Add a new product window
5. Select Water activity from the Select test dropdown menu (Figure32).
6. Set minimum and maximum reading values (Figure32).
NOTE: The minimum and maximum values for a water activity reading should be integers to represent a
w
values.
There is no need to do anything in the Moisture Content Model section for water
activity readings.
7. Select the Add product button when all required information is entered (Figure32).
NOTE: Water activity readings are the only readings available in the freemium version. Additional readings can
be accessed when subscribed to a premium plan. Learn more about SKALA subscription plans at metergroup.
com/skala-upgrade or contact Customer Support.
Figure33 will appear once a Product has been added .