1.2 Instrument description
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
2
￭￭￭￭￭￭￭￭
855 Robotic Titrosampler
Up to three control instruments (Titrando, Dosing Interface, USB Sample
Processor, etc.) can be controlled via USB connection during operation
with the 900 Touch Control. If the tiamo software is used, then there is no
limit to the number of control instruments that can be used to extend the
system.
Updating the device software is described in the manual for the Touch
Control or in the online help for the tiamo software.
1.2 Instrument description
The 855 Robotic Titrosampler is a combined analyzer, unifying the func-
tionality of a titrator and a sample changer. It can be seamlessly incorpora-
ted as a system component and control instrument into a Metrohm
Titrando system.
The 855 Robotic Titrosampler is a versatile instrument. It has been
designed exclusively for usage in factories, as long as ambient conditions
(see chapter 7.7, page 58) are fulfilled, and laboratories and thereby cov-
ers a wide range of applications.
Thanks to the integration of high-performance USB interfaces, it can be
incorporated seamlessly into a Metrohm Titrando system. The versatile
communications options of the Titrando system (Remote Box, LIMS link,
etc.) can thus all be used. Thanks to these abilities, a 855 Robotic Titro-
sampler is predetermined for all kind of automation tasks in a modern lab-
oratory, especially for highly integrated laboratory data systems.
The user interface of the Touch Control or the tiamo software guarantees
comfortable operation and programming of the 855 Robotic Titrosampler.
The comprehensive range of commands and the various configuration
possibilities can comfortably and efficiently be used this way. The integra-
tion into the Titrando system also guarantees a 100% conformity of the
complete automation system with the FDA regulations (Food and Drug
Administration), especially with the regulation 21 CFR part 11, electronic
records and signatures.
There are exchangeable standard sample racks available for many vessel
dimensions. Freely selectable special beaker positions can be defined for
e.g. rinsing or conditioning beakers on every rack.
The equipment with a 786 Swing Head allows to process a large number
of samples in one single sample series. The robotic arms for the 786
Swing Head make it possible to move to any given point on a sample rack.
This way the number (a maximum of 999 rack positions) and sequencing
of the samples is almost unlimited.
Customer-specific special racks for individual requirements can be fabrica-
ted upon request.
To Next Page
Loading...
Need help?
General
