1.2 Intended use
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
2
￭￭￭￭￭￭￭￭
883 Basic IC plus
defined by the size of the sample loop is injected and flushed to the sepa-
ration column with the eluent.
Suppressor
The suppressor consists of the suppressor drive, the MSM Rotor A and an
adapter.
Peristaltic pump
The peristaltic pump is used for pumping sample and auxiliary solutions. It
can rotate in both directions.
Conductivity detector
The conductivity detector continuously measures the conductivity of the
liquid passing through and outputs these signals in digital form (DSP –
Digital Signal Processing). The conductivity detector exhibits outstanding
thermal stability and thus guarantees reproducible measuring conditions.
Separation column
The intelligent separation column separates different components accord-
ing to their interactions with the column. Metrohm separation columns
are equipped with a chip where their technical specifications and history
(start-up, operating hours, injections etc) are stored.
1.2 Intended use
The 883 Basic IC plus is used for the determination of anions or polar
substances with chemical suppression using ion chromatography. It can
also be used as needed for the determination of anions without chemical
suppression or for cations.
This instrument is suitable for processing chemicals and flammable sam-
ples. Therefore, the use of the 883 Basic IC plus requires the user to have
basic knowledge and experience in handling toxic and caustic substances.
Knowledge regarding the application of fire prevention measures prescri-
bed for laboratories is also mandatory.
To Next Page
Loading...
Need help?
General
