Metrohm 883 Basic IC plus - Conductivity Detector Setup

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Installation
883 Basic IC plus
￭￭￭￭￭￭￭￭
43
3.15 Conductivity detector
The conductivity detector continuously measures the conductivity of the
liquid passing through and outputs these signals in digital form (DSP –
Digital Signal Processing). The conductivity detector exhibits outstanding
thermal stability and thus guarantees reproducible measuring conditions.
2
1
3
Figure 15 Front of conductivity detector
1
IC detector 2.850.9010
2
Opening for temperature sensor
3
Detector input capillary
Permanently installed.