￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
6 Technical specifications
883 Basic IC plus
￭￭￭￭￭￭￭￭
95
6.7 Peristaltic pump
Type 2-channel peristaltic pump
Shift direction Clockwise/counterclockwise
Rotational speed 0 - 42 rpm in 7 levels of 6 rpm each
Pumping charac-
teristics
0.3 mL/min at 18 rpm; with standard pump tubing (6.1826.420)
Pump tubing
material
Recommended: PharMed® (Ismaprene)
6.8 Detector
You can find the technical specifications for the detector in the manual for
the detector.
6.9 Power connection
Required supply
voltage
100 - 240 V ± 10% (autosensing)
Required fre-
quency
50 - 60 Hz ± 3 Hz (autosensing)
Power consump-
tion
￭ 65 W for typical analysis application
￭ 25 W standby (conductivity detector to 40 °C)
Power supply unit ￭ Up to 300 W maximum, electronically monitored
￭ Internal fuse 3.15 A
6.10 Interfaces
USB
Entry 1 USB upstream, type B (for connection to the PC)
Detector 1 15-pin high-density DSUB (female)
Column recogni-
tion
for an intelligent column
To Next Page
Loading...
Need help?
General
