Metronix ARS 2100 SE Series User Manual

Page 59
5.2.14 Electronic cam disk
The term “(electronic) cam disk” describes applications in which an input angle or an input position is
reproduced as an angle set point or as a position set point through a function. Typically, these
applications are master-slave-applications.
Via the parameterisation program Metronix ServoCommander
®
the servo drive ARS 2100 SE can
provide the following functionalities:
 Cam disks with cam switches and axis error compensations can be loaded from an Excel table
 Display, activation and online manipulation of cam disks
 Mapping of the trip cams on digital outputs
 Display and activation of the axis error compensation
 Cam disks with cam switches and axis error compensations can be loaded and saved using DCO
files.
 Displaying an active CAM or axis error compensation in the commands window
For further information, please refer to the Software Manual “Servo drives ARS 2000”.
Product Manual „Servo drives ARS 2100 SE“ Version 5.0

Metronix ARS 2100 SE Series Specifications

General

Brand	Metronix
Model	ARS 2100 SE Series
Category	Servo Drives
Language	English