Metronix ARS 2100 SE Series User Manual

Page 74
8.2 ARS 2100 SE complete system
The complete servo drive ARS 2100 SE system is shown in Figure 13. The following components are
required for using the servo drive:
 Main switch mains supply
 Fault current protection switch type B (RCD), AC/DC sensitive 300mA (if this is required by an
application)
 Automatic circuit breaker
 Servo drive ARS 2100 SE
 Motor with motor cable
 Mains cable
The parameterisation requires a PC with USB connection.
A slow-blow (B16) single-phase automatic circuit breaker of 16 A has to be installed in the mains
supply line.
Product Manual „Servo drives ARS 2100 SE“ Version 5.0

Metronix ARS 2100 SE Series Specifications

General

Brand	Metronix
Model	ARS 2100 SE Series
Category	Servo Drives
Language	English