Metronix ARS 2100 SE Series - Connection: Power Supply [X9]; Device Side [X9]; Counterplug [X9]

Page 76
8.3 Connection: Power supply [X9]
The servo drive ARS 2100 SE receives its 24 VDC power supply for the control electronics via
connector [X9].
The mains voltage supply is single-phase. As an alternative to AC feed or for the purpose of DC bus
coupling a direct DC supply for the DC bus is possible.
8.3.1 Device side [X9]
 ARS 2102 SE and ARS 2105 SE PHOENIX MINI-COMBICON MC1.5/9-G-5.08 BK
 ARS 2108 SE PHOENIX COMBICON MSTBA 2,5/9-G-5.08 BK
8.3.2 Counterplug [X9]
 ARS 2102 SE and ARS 2105 SE PHOENIX MINI-COMBICON MC1.5/9-ST-5.08 BK
 ARS 2108 SE PHOENIX COMBICON MSTB 2,5/9-ST-5,08 BK
 ARS 2102 SE and ARS 2105 SE PHOENIX MINI-COMBICON connector housing 12-pole,
KGG-MC1,5/12 BK
 ARS 2108 SE PHOENIX COMBICON connector housing 12-pole,
KGS-MSTB 2,5/9 BK
 coding to PIN 9 (GND24V)
Product Manual „Servo drives ARS 2100 SE“ Version 5.0