Manual Corvus-eco
Starting up 30
Trouble shooting
•
The RS-232 cable, included in the delivery, should
preferably be used. If the cable is in-house produced
the correct wiring has to be ensured. See connection
diagram in Chapter "Connectors"
• The interface configurations of the control unit has to
correspond accurately with the following settings.
• If the delivered RS-232 cable is used with an additional
interface adapter, please verify if this adapter does not
modify the RS-232 wiring.
• The serial interface of the control unit may not be
occupied by other programs.
• Data bits • 8
• Stop bits • 1
• Parity • no
• Handshake • no
• Baudrate • 57600
To Next Page
Loading...