Manual Corvus-eco
Functions 45
Venus-1 controller commands (examples)
System commands
save parameters:
save
restart controller:
reset
Configuration commands
[parameter] _ [axis index] _ [command] _
Example: switching on the 2
nd
axis
1 2 setaxis
Positioning commands
[axis 1] [axis 2] [axis 3] move
Example:
Absolute move, all axes are moved to the coordinates below
1.204 4.01 3.4 move
Relative move,
0.001 0.002 0.001 r
Status commands
System status:
st
Status of the digital inputs:
getin
Actual position read out
pos
More information see in manual "Venus-1 command lan-
gua
ge"
To Next Page
Loading...