Manual Corvus-eco
Functions 52
Closed-Loop function
This function enables the operation in a feedback control
mode.
Therefore the actual position is moni
tored by a measuring
system and looped back to the controller.
Depending on the type of the measuring system the function
has the following advantages.
• Increasing the repeatability
• Improvement of the absolute accuracy
• Step monitoring
• Load compensation during the movement and a standstill
• Improved controlling behavior
• Supports fast and high precise positioning procedures
using the closed loop function " in-window "
• Enables high precision measuring functions
• Increases precision of the "trigger out function"
• Increases precision of the "position capture function"
Supported measuring systems
Corvus supports the following measuring system
s:
• Digital encoder (RS422 differential)
• Analog encoder (1 Vpp differential)
• Marzhauser MR 500 measuring system
To Next Page
Loading...