Micos Corvus ECO - Page 55

Manual Corvus-eco
Functions 55
Status LED´s
Related commands:
Cycle LED Status
active
Hardware ok
not active Hardware error
Sensor LED Status
active
No sensor available or sensor error
not active Sensor ok
Command Description
setcloop
enables closed loop mode
setscaleinterface configurates sin/cos module
setclperiode
adapts to the encoder types
setclfactor adapts to the encoder types
setscaletype
configurates sin/cos modules
setclpara configurates PID controller
refmove
executes moves to reference
mark
1
6
9
5
S
C
Sensor
C
y
cle