Microcar MC1 User Manual

46
SIDE BODY REMOVAL
Place the car on an elevator or on a classic stand.
Support on the front under the engine cradle.
• Remove the door (see page 8).
• Remove the hatchback (see page 14).
• Remove the front bumper (see page 19).
• Remove the back bumper (see page 23).
• Remove the bonnet (see page 22).
• Remove the front wing (see page 20).
• Remove the door hinges (see page 22).
• Remove windscreen (see page 42).
• Remove the roof (see page 44).
• Remove the inside trim (see page 25).
• Remove the quarter light (see page 36).
• Remove the back wing (seepage 37).
• Remove the back light and its waterproof piece (see page 37).
• Remove the safety belt kit and the striker plate (see pages 27 et 38).
• Remove the instrument panel (see page 29).
• Remove the opening switch of the hatchback (see page 24).
Support on the back under the cross beam and the axle.

Microcar MC1 Specifications

General

Brand	Microcar
Model	MC1
Category	Automobile
Language	English